4,517 downloads·Added on: September 6, 2011·Manufacturer: REALTEK
CPU
• 64bit AMD FX, Phenom II X6/X4/X3/X2, Athlon II X4/X3/X2 and Sempron CPU.
Please refer to CPU Support for compatible CPU; the above description is for reference only.
Hyper Transport Bus
• HyperTransport 3.0 supporting speed up to 5200MT/s
Chipset
• AMD 760G and SB710 Chipset
Main Memory
• Supports two unbuffered DIMM of 1.5 Volt DDR3 800/1066/1333 DRAM, 16GB Max
Slots
• 1 PCI Express x16 slot with x16 operation (PCI Express Bus SPEC V2.0 compliant)
• 1 PCI EXpress x1 slot
• 1 PCI slot, support 3.3V/ 5V PCI bus Interface.
On-Board SATA
• 6 SATA 3Gb/s (1~6) ports by AMD SB710
- Supports storage and data transfers at up to 3Gb/s
RAID Function
- SATA 1~6 support RAID 0, 1, 10 or JBOD mode by AMD SB710
MSI Reminds You...
• The RAID setup floppy disk is optional depending on the districts. You can download the files from the website to make the setup disk.
Audio
• Chipset integrated by Realtek ALC887
- Flexible 7.1-channel audio with jack sensing
- Compliant with Azalia 1.0 Spec
LAN
• Realtek PCI-E GbLAN controller RTL8111E
- Supports 10Mb/s, 100Mb/s and 1000Mb/s
- Compliance with PCI-Express Bus specification v1.0a
Internal I/O Connectors
- 1 x ATX 24-pin power connector
- 1 x ATX 4-pin 12V CPU power connector
- CPU x 1 / System x 1 FAN connectors
- 1 x Front panel audio connector
- 1 x Front panel connector
- 1 x Chassis intrusion switch connector
- 2 x USB 2.0 connectors
- 6 x Serial ATA II connectors
- 1 x Serial port connector
- 1 x Clear CMOS jumper
- 1 x SPDIF-out connector
- 1 x TPM module connector
Back Panel I/O Ports
- 1 x PS/2 mouse port
- 1 x PS/2 keyboard port
- 6 x USB 2.0 ports
- 1 x Graphic Card port
- 1 x DVI-D port
- 1 x RJ45 LAN jack
- 1 x 3 in 1 audio jack
Dimension
• 24.4cm(L) x 20.5cm(W) Micro-ATX Form Factor
Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
• 64bit AMD FX, Phenom II X6/X4/X3/X2, Athlon II X4/X3/X2 and Sempron CPU.
Please refer to CPU Support for compatible CPU; the above description is for reference only.
Hyper Transport Bus
• HyperTransport 3.0 supporting speed up to 5200MT/s
Chipset
• AMD 760G and SB710 Chipset
Main Memory
• Supports two unbuffered DIMM of 1.5 Volt DDR3 800/1066/1333 DRAM, 16GB Max
Slots
• 1 PCI Express x16 slot with x16 operation (PCI Express Bus SPEC V2.0 compliant)
• 1 PCI EXpress x1 slot
• 1 PCI slot, support 3.3V/ 5V PCI bus Interface.
On-Board SATA
• 6 SATA 3Gb/s (1~6) ports by AMD SB710
- Supports storage and data transfers at up to 3Gb/s
RAID Function
- SATA 1~6 support RAID 0, 1, 10 or JBOD mode by AMD SB710
MSI Reminds You...
• The RAID setup floppy disk is optional depending on the districts. You can download the files from the website to make the setup disk.
Audio
• Chipset integrated by Realtek ALC887
- Flexible 7.1-channel audio with jack sensing
- Compliant with Azalia 1.0 Spec
LAN
• Realtek PCI-E GbLAN controller RTL8111E
- Supports 10Mb/s, 100Mb/s and 1000Mb/s
- Compliance with PCI-Express Bus specification v1.0a
Internal I/O Connectors
- 1 x ATX 24-pin power connector
- 1 x ATX 4-pin 12V CPU power connector
- CPU x 1 / System x 1 FAN connectors
- 1 x Front panel audio connector
- 1 x Front panel connector
- 1 x Chassis intrusion switch connector
- 2 x USB 2.0 connectors
- 6 x Serial ATA II connectors
- 1 x Serial port connector
- 1 x Clear CMOS jumper
- 1 x SPDIF-out connector
- 1 x TPM module connector
Back Panel I/O Ports
- 1 x PS/2 mouse port
- 1 x PS/2 keyboard port
- 6 x USB 2.0 ports
- 1 x Graphic Card port
- 1 x DVI-D port
- 1 x RJ45 LAN jack
- 1 x 3 in 1 audio jack
Dimension
• 24.4cm(L) x 20.5cm(W) Micro-ATX Form Factor
Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
- COMPATIBLE WITH:
- Windows 7
Windows 7 64 bit - file size:
- 5.9 MB
- filename:
- realtek_pcielan_7_mb.zip
- CATEGORY:
- Network Card
It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver.
Problems can arise when your hardware device is too old or not supported any longer.
4,818 downloads·Added on: June 17, 2017·Manufacturer: Intel
This archive contains the files needed for installing Intel USB 3.0 driver. If it has been installed, updating (overwrite-installing) may fix problems, add new functions, or expand existing ones. Even though other OSes might be compatible as well, we do not recommend applying this release on platforms other than the ones specified.
Installation Instructions:
- Save and unzip the downloadable archive.
- Locate the hard drive directory where the driver files are stored with the browser or the explore feature of Windows.
- Double click the “Setup.exe” from this directory.
- The Install dialog will appear.
- Click “Next” to continue.
- Read License Agreement and click “Yes” to proceed.
- Review Readme File Information and click “Next” to proceed.
- When the “Setup Progress” is complete click “Next” to proceed.
- Lastly, the “Setup Complete” screen appears so click “Finish” to restart your computer.
VERIFYING INSTALLATION:
- Click 'Start' then right click on 'Computer' button and then click on properties.
- Click on the 'Device Manager' selection on the left.
- Select 'Universal Serial Bus controllers'. The Intel USB 3.0 eXtensible Host Controller device and Intel USB 3.0 Root Hub device should be listed and not yellow banged. If not, the driver is not installed correctly.
IDENTIFYING VERSION NUMBER:
- Click 'Start' then right click on 'Computer' button and then click on properties.
- Click on the 'Device Manager' selection on the left.
- Select 'Universal Serial Bus controllers' then double click on the Intel USB 3.0 eXtensible Host Controller device or Intel USB 3.0 Root Hub device.
- Click on 'Driver' tab and note the driver version.
UNINSTALLING:
- NOTE: This procedure assumes the above installation process was successful. This uninstallation procedure is specific only to the version of the driver and installation files included in this package.
- Click on the 'Start' button, then click on the 'Control Panel' icon, and then double click on 'Programs and Features', right click on 'Intel USB 3.0 eXtensible Host Controller Driver' and select 'Uninstall' option
- Click 'Next' to uninstall the driver.
- Click on 'Finish' button to restart the computer.
About USB Drivers:
Windows operating systems automatically apply a generic driver that allows users to transfer files using the USB (Universal Serial Bus) port; however, installing the appropriate software can bring about significant changes.
If the proper USB software is installed, systems will benefit from improved compatibility with different devices, numerous fixes regarding USB issues, and various other changes that can increase transfer speed with external storage drives.
When it comes to the installation steps, simply check to make sure that the download record is compatible with your system characteristics, get the package, run the setup, and follow the on-screen instructions for a complete update.
Bear in mind that even though other OSes might be compatible, it would be best if you applied this package only on specified platforms. In addition to that, as technology evolves from one day to another, we recommended that you always use the latest software available.
That being said, click the download button, get and apply the present version and enjoy your newly updated system. Also, constantly check back with our website to find out when a new version is available.
Installation Instructions:
- Save and unzip the downloadable archive.
- Locate the hard drive directory where the driver files are stored with the browser or the explore feature of Windows.
- Double click the “Setup.exe” from this directory.
- The Install dialog will appear.
- Click “Next” to continue.
- Read License Agreement and click “Yes” to proceed.
- Review Readme File Information and click “Next” to proceed.
- When the “Setup Progress” is complete click “Next” to proceed.
- Lastly, the “Setup Complete” screen appears so click “Finish” to restart your computer.
VERIFYING INSTALLATION:
- Click 'Start' then right click on 'Computer' button and then click on properties.
- Click on the 'Device Manager' selection on the left.
- Select 'Universal Serial Bus controllers'. The Intel USB 3.0 eXtensible Host Controller device and Intel USB 3.0 Root Hub device should be listed and not yellow banged. If not, the driver is not installed correctly.
IDENTIFYING VERSION NUMBER:
- Click 'Start' then right click on 'Computer' button and then click on properties.
- Click on the 'Device Manager' selection on the left.
- Select 'Universal Serial Bus controllers' then double click on the Intel USB 3.0 eXtensible Host Controller device or Intel USB 3.0 Root Hub device.
- Click on 'Driver' tab and note the driver version.
UNINSTALLING:
- NOTE: This procedure assumes the above installation process was successful. This uninstallation procedure is specific only to the version of the driver and installation files included in this package.
- Click on the 'Start' button, then click on the 'Control Panel' icon, and then double click on 'Programs and Features', right click on 'Intel USB 3.0 eXtensible Host Controller Driver' and select 'Uninstall' option
- Click 'Next' to uninstall the driver.
- Click on 'Finish' button to restart the computer.
About USB Drivers:
Windows operating systems automatically apply a generic driver that allows users to transfer files using the USB (Universal Serial Bus) port; however, installing the appropriate software can bring about significant changes.
If the proper USB software is installed, systems will benefit from improved compatibility with different devices, numerous fixes regarding USB issues, and various other changes that can increase transfer speed with external storage drives.
When it comes to the installation steps, simply check to make sure that the download record is compatible with your system characteristics, get the package, run the setup, and follow the on-screen instructions for a complete update.
Bear in mind that even though other OSes might be compatible, it would be best if you applied this package only on specified platforms. In addition to that, as technology evolves from one day to another, we recommended that you always use the latest software available.
That being said, click the download button, get and apply the present version and enjoy your newly updated system. Also, constantly check back with our website to find out when a new version is available.
Do not forget to set a system restore point before installing MSI 760GM-P23 (FX) i-Charger driver 1.0.104 driver, to avoid problems that may occurs when you install a wrong driver, or for other OS version etc. Display / Monitor Drivers for MSI MSI Game Controller Drivers Download Game Controller Drivers for MSI MSI. Sound / Audio Drivers for MSI MSI USB Drivers Download USB Drivers for MSI MSI. Free Download >> MSI 760GM P23 Driver.
760gm P23 Fx Drivers
- COMPATIBLE WITH:
- Windows 7
Windows 7 64 bit - file size:
- 5.5 MB
- filename:
- intel_usb30_skl.zip
Windows Xp Usb Controller Driver
- CATEGORY:
- Motherboard
It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver.
Problems can arise when your hardware device is too old or not supported any longer.